Specifications and Certifications
Coastcom complies with the following:
ADA
(Americans With Disabilities)
D/I Mux III Design Compliance
To satisfy safety agency requirements, the user is advised
that D/I Mux III equipment is “To be installed only in Restricted
Access Areas (Dedicated Equipment Rooms, Equipment Closets, or
the like) in Accordance with Articles 110-16, 110-17, and 110-18
of the National Electrical Code, ANSI/NFPA No. 70.”
- Complies with applicable sections of AT&T publications
43801, 54018, 54075, 62310 and 62411
- Complies with applicable sections of ANSI publications T1.403,
and T1.107
- Complies with regulatory standards:
FCC Part 15, Subpart B, Class A
FCC Part 68
Industry Canada CS-03
UL 1950, CAN/VSA 22.2 No.950
R Series Design Compliance
R409 Design Compliance
EMC/EMI:
Compliant with: EN 55022 Class A, CISPR22 Class A
Compliant with: EN 50082, 50081
Compliant with: FCC 15
Safety Requirements
Compliant with: EN 60950, UL1950, CAN/CSA 22.2 NO. 950
Telecom
Compliant with: FCC68, CS-03, CE168X, BABT
FCC Requirements, Part 68
This equipment complies with Part 68 of the FCC rules. On this
equipment is a label that contains, among other information, the
FCC registration number and ringer equivalence number (REN) for
this equipment. If requested, this information must be provided
to the telephone company.
R25 Design Compliance
FCC Requirements, Part 15
This equipment has been tested and found to comply within the
limits for a Class A digital device pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used
in accordance with the instruction manual may cause harmful interference
to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the
user will be required to correct the interference at the user's
own expense.
FCC Requirements, Part 68
This equipment complies with Part 68 of the FCC rules. On the
bottom cover of this equipment is a label that contains, among
other information, the FCC registration number. A ringer equivalence
number (REN) is not used for this digital equipment. If requested,
this information must be provided to the telephone company.
R25 CSU/DSU registration number is:
FCC 68 Registration Number: 2PUTAI-30893-DE-N
|
